TruTite 313 Thread Loc 50ml

Product Description

TruTite™ 313 Thread Lock is designed for the instant assembly of threaded fasteners which if required can be disassembled with standard hand tools for maintenance or replacement purposes.

The product is an anaerobic thread locks which cures when oxygen is no longer present. This occurs when the air between your two metal fittings disperses which then allows the blue liquid to cure in a matter of minutes (please see curing times). This process then forms a strong fitment which will prevent any loosening and leaks from vibrations caused to the fitment.

TruTite™ 313 Thread Lock is most often used on Brass and Steel but is also effective on Stainless Steel,Aluminium and BZP Steel products

Curing Times
Metal Type Duration
Brass up to 0.5mins
Steel up to 4mins
Stainless Steel up to 6mins
BZP Steel up to 30mins
Aluminium up to 35mins

Please note: curing time can be affected by thread pitch and ambient temperature at time of
application.

Results are based upon application in 22°C atmosphere
System can be used within 1-3 hours of TruTite™ 313 Thread Lock application
Full curing time is between 8-12 hours

TruTite 313 Thread Lock Approvals
DIN EN 751-1  — (Gas Approval)
BS 6920 — (Water Approval)

Directions for use
Before use read TruTite™ 313 Thread Lock MSDS
Ensure all metal parts are clean and dry

Apply in one full rotation to male and female metal parts,use sparingly
Excess product will not dry,remove with cloth
To disassemble,use hand tools,if difficult to do so heat up to 250°C and repeat whilst hot
Can not be used on plastic fittings